GAS SCAVENGING SYSTEM Evacuater
Conforms to: BS EN ISO 7396-2 : 2007 | BS EN ISO : 80601-2-13:2012+A2:2019
HTM 01-02
Certifications: CE Medical Devices Marking according to 93/42/EEC Directive
ISO 13485:2016 – Medical devices – Quality management systems
ISO 9001:2015 – Quality management systems
Evacuater – the Anaesthetic Gas Scavenging (AGS) units are designed to remove waste gases effectively from the patient breathing circuit or patient ventilation circuit from operating environment to an appropriate place of discharge.
The evacuation process is intended to reduce the exposure of healthcare personnel and provide a safe, healthy workspace by controlling occupational exposure to waste anaesthetic gases.
AGS units are available in Single Blower (MONO) and Double Blower (DUO) configuration. These are dedicated low velocity evacuation and disposal system for collection of excess gases from one or more Operation Rooms and discharged to the outdoors. The powerful side channel exhaust blower makes the unit very compact, reliable and creates sufficient negative pressure, so that cross- contamination do not occur in a dedicated pipeline where multiple ORs are connected.
Special Features
- Robust & Compact design.
- User friendly controller.
- Low 110 V Remote Switches.
- Choice of Single or Double Blower Unit.
- High performance side channel blowers from Germany.
- Optional Simple & Durable remote start switches.
- Compliance: MDR 2017 / 745
- Warranty of 12 months from its commission date or invoice Date.
Optional Features
- Remote operation from multiple OT is available
- Receiving unit with Transfer & Evacuation Hose recommended for each OT connected to the system.
MONO or DUO are part of active evacuation and disposal system which can produce high capture levels and removal at the source eliminates the possible long term health hazards for the exposed medical staff in hospitals, stand-alone operating rooms, recovery rooms, dental operations etc. These are most suitable onsite disposal system for health care facilities that have multiple operating suites.
AGS unit “DUO.” is a double unit set-up wherein, one unit is in operational mode while other unit is in stand-by mode. But DUO has additional advantage of automatically supporting the operating unit in case of higher demand and remains operational till restoration of normalcy. It also offers a choice to pre-select operative & stand-by mode.
Technical & Ordering Information
Model | Type | System Capacity | Electrical Input | Power | Ordering Code |
AGS – 4 – OR | Mono | 650 LPM | 3 Phase, 345-415v, 50Hz | 0.85 kW | 6241610 |
AGS – 8 – OR | Mono | 1300 LPM | 1.3 kW | 6241620 | |
AGS – 12 – OR | Mono | 2080 LPM | 1.6 kW | 6241630 | |
AGS – 4 – OR | Duo | 650 LPM | 3 Phase, 345-415v, 50Hz | 0.85 kW | 6242610 |
AGS – 8 – OR | Duo | 1300 LPM | 1.3 kW | 6242620 | |
AGS – 12 – OR | Duo | 2080 LPM | 1.6 kW | 6242630 | |
Note: Suction capacity measured at intake of the unit at -125mbar. |
NOTE : A dedicated set-up of Anaesthetic Gas Scavenging System (AGSS) / Waste Anaesthetic Gas Disposal (WAGD) functionally
have four essential components :
- Plant – Low vacuum pump or blower.
- Transfer Hose – To transfer excess gas from APL Vale of a breathing circuit or the exhaust port of a ventilator.
- Receiving Unit – An interface between breathing and disposal system. **
- Disposal System :
- Evacuation hose – To evacuate excess gas from receiving unit..
- Terminal outlet – Terminal for pipework connection.
- Interconnecting pipework – Connects outlet / outlets to blower for eventual disposal.
**The scavenger interface / receiving unit is the most important component in an active system for protection from excessive positive system pressure. (Refer to the separate brochure “Scavenging Interface”.)
AGSS / WAGD Accessories
Receiver / Interface Unit Ordering Code : 6070100
3m BS Compatible AGSS Evacuation Hose Assembly (5m on request) Ordering Code : 6071100
Kink-resistance transfer hose with a pair of 30 mm conical (ISO). Male & Female connector. Ordering Code : 6070800
Receiver / Interface Unit with Transfer & Evacuation Hose assembly (3m) conforming to BS EN ISO : 80601-2-13:2012+A2:2019 Ordering Code : 6070101
Remote Switch Ordering Code : 6071000
Scavenging Connector for Transfer Hose - 30 mm ISO Conical Male & Female(Pair) Ordering Code : 6070103
AGSS Outlet - DISS Ordering Code : Wall - 6016711 Ordering Code : Panel - 6016722
AGSS Outlet - BS Ordering Code : Wall - 60133611 Ordering Code : Panel - 60133621